{ "college": "santiago-canyon-college", "edition": "2025-2026", "code": "ACA", "name": "Apprenticeship: Carpentry", "sourceUrl": "https://sccollege.elumenapp.com/catalog/catalog/courses", "courses": [ { "code": "ACA 002B", "subject": "ACA", "number": "002B", "title": "Slabs/Interior-Exterior Footings", "cid": [], "transfer": [], "description": "This class highlights the techniques and procedures used in the layout and setting of footing forms according to prints and shop drawings. Introduction of slab construction for casting tilt up panels will be discussed. Acceptable elevation tolerances, proper concrete placement and slab leveling will be stressed. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 003A", "subject": "ACA", "number": "003A", "title": "Tilt-Up Introduction", "cid": [], "transfer": [], "description": "Designed to familiarize tilt-up students with basic panel types and typical construction methods used in the tilt-up industry. This course identifies panel features, applications, specialty hardware, and provides an overview of the construction and placement of tilt-up panels. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 004A", "subject": "ACA", "number": "004A", "title": "Lifting, and Bracing Safety", "cid": [], "transfer": [], "description": "This class will describe the lifting procedures and accident preventions measures necessary to safely raise and place tilt-up panels. Students will be introduced to various types of bond breakers used in the industry. Product catalogs will be used to review the proper use of each product. Safety practices on the connection points and bracing of wall panels will be discussed in detail. Manufactures specification on specific hardware used to secure temporary braces will also be covered. Students will review all safety aspects of rigging and setting panels with the crane. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 004B", "subject": "ACA", "number": "004B", "title": "Poured-in-Place Wall Forms", "cid": [], "transfer": [], "description": "This course provides instruction for poured-in place wall systems and will highlight decorative finish applications. Both basic formwork procedures and additional techniques to create embellished wall details on finished concrete surfaces will presented. Students will identify materials such as exposed aggregate, faux veneers, and various artistic impressions used to create architectural features as part of the finished surface design. The importance of formwork alignment and reinforcement will be emphasized during manipulative exercises. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 004C", "subject": "ACA", "number": "004C", "title": "Print Reading", "cid": [], "transfer": [], "description": "This course introduces basic visualization skills needed for reading and interpreting construction prints. Views, elevations and the role of specifications as they relate to insulation details on prints will be discussed. An awareness of sustainable and green building practices will be covered during the course. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-004c", "subject": "ACA" } ] }, { "code": "ACA 005A", "subject": "ACA", "number": "005A", "title": "Wall-Column Forms/Cutting and Burning", "cid": [], "transfer": [], "description": "This course presents the forming methods and techniques used in the construction of reinforced concrete walls and columns. Form design, print reading, estimating, and hands-on projects for single and double waler forming systems will be included. Students will be introduced to safe operating and cutting procedures for the oxygen-acetylene torch. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-005a", "subject": "ACA" } ] }, { "code": "ACA 005B", "subject": "ACA", "number": "005B", "title": "Site Work/Curb and Gutter", "cid": [], "transfer": [], "description": "This course covers the forming methods and techniques used in the construction of site work, curbs and gutters. Site work layout, elevation, and construction practices will be presented. Jobsite safety, print interpretation, material identification and site preparation will be included in the training. Students will construct sidewalk, curb and gutter forms to prints specifications. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 005C", "subject": "ACA", "number": "005C", "title": "Specialized Forms and Rigging", "cid": [], "transfer": [], "description": "This course will instruct students in the construction of specialized forms used to create exterior architectural design feature on tilt-up buildings. An emphasis will be placed on interpretation of design feature details on prints, location of rigging points, and building methods for selected forms. In addition to concrete calculations, practical assignments will focus on rigging safety, load formulas, lifting hardware and procedures. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 021A", "subject": "ACA", "number": "021A", "title": "Orientation", "cid": [], "transfer": [], "description": "This course provides an overview of the construction industry, safety overview, with focus on tool identification and use. Upon successful completion, students will receive OSHA 10 Hour and Powder Actuated Tool Certifications.Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 021B", "subject": "ACA", "number": "021B", "title": "Safety and Health Certifications", "cid": [], "transfer": [], "description": "This course promotes hand/power tool and equipment skill development for various construction applications. Scaffold building and equipment operating procedures will also be covered. Financial and life skills relevant to surviving the construction industry will be presented. Upon successful completion, students will be issued United Brotherhood of Carpenters (UBC) Scaffold Erector-Welded Frame Qualification Card.Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-021b", "subject": "ACA" } ] }, { "code": "ACA 021C", "subject": "ACA", "number": "021C", "title": "Basic Wall Framing", "cid": [], "transfer": [], "description": "This course presents wall construction theory, methods, and procedures required to frame basic residential walls. Practical experience using proper tool techniques and appropriate materials will provide students with fundamental skill development. An introduction to print reading will prepare students to locate measurements for determining wall lengths and size of openings. Students will perform basic wall layout tasks, use plating procedures, and assemble and brace framing before aligning and completing the selected wall construction project to industry standards. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 021E", "subject": "ACA", "number": "021E", "title": "Tool/Equipment Applications", "prerequisite": "ACA 021A (Orientation) and ACA 021B (Safety and Health)", "cid": [], "transfer": [], "description": "This course promotes hand/power tool and equipment skill development for various construction applications. Scaffold building and aerial lift safety and operating procedures will also be covered. Upon successful completion, students will be issued United Brotherhood of Carpenters (UBC) Aerial Lift and Scaffold Erector-Welded Frame Qualification Cards. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-021e", "subject": "ACA" } ] }, { "code": "ACA 022A", "subject": "ACA", "number": "022A", "title": "Commercial Floor Framing", "cid": [], "transfer": [], "description": "This course covers floor joist construction and the various installation techniques used in the commercial industry. Students will interpret floor plans for job planning, identify floor joist system, and calculate material take offs. Integration of wall plating, joist layout and floor sheathing methods will be included. Instruction will incorporate measuring skills, use of math operations, specialty hardware applications, and identification of appropriate building codes. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 022B", "subject": "ACA", "number": "022B", "title": "Basic Stairs", "cid": [], "transfer": [], "description": "This course provides an introduction to stair framing theory, terminology and construction techniques. Students will interpret floor plans and drawing elevations for job planning, and to layout and detail stair stringers. Methods for calculating the number of stairs, landing height, stair threads and riser dimensions will be presented and practiced. Instruction will include measuring skills, mathematical principles, stair and handrail fabrication, assembly and installation. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 022D", "subject": "ACA", "number": "022D", "title": "Exterior Finish Details", "cid": [], "transfer": [], "description": "In this course the terminology, design considerations and construction techniques for various types of exterior detail installations will be covered. Students will use plan views and drawing elevations for job planning activities, including calculating dimensions and materials, identifying wall covering types and other exterior construction details. Students will apply the construction techniques presented to complete various exterior detail installations to print specifications. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 022E", "subject": "ACA", "number": "022E", "title": "Commercial Roof Framing", "cid": [], "transfer": [], "description": "This course provides an introduction to basic gable roof framing, terminology and construction methods. Students will interpret plan and elevation views to determine rafter systems and layout details to complete project assignments. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 023B", "subject": "ACA", "number": "023B", "title": "Basic Roof Framing", "cid": [], "transfer": [], "description": "This course provides an introduction to basic gable roof framing, terminology, characteristics and construction methods. Students will interpret print views and drawing elevations for job planning, and to determine rafter systems and layout details. Basic rise, run, rafter angles and length calculations will be practiced. Framed wall construction will be incorporate to facilitate the gable roof assembly techniques and installation procedures that are the focus of this training. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-023b", "subject": "ACA" } ] }, { "code": "ACA 023C", "subject": "ACA", "number": "023C", "title": "Advanced Roof Framing", "cid": [], "transfer": [], "description": "This course provides the advanced skills used to frame hip roof types, and includes terminology, roof characteristics and construction methods. Students will interpret print views and elevations for job planning to determine hip roof rafter systems and layout details. Students will perform rise, run, rafter angles and length calculations. Framed wall construction will be incorporate to facilitate the hip roof assembly techniques and installation procedures that are the focus of this training. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 024A", "subject": "ACA", "number": "024A", "title": "Basic Commercial Framing", "cid": [], "transfer": [], "description": "This course provides an introduction to basic wall framing theory and commercial construction techniques. Floor plan interpretation will be used by students for job planning, design recognition, and to determine materials. Students will layout and detail wall plates for locating basic wall components and door openings typically found on commercial projects. Instruction will include measuring skills, mathematical principles, wall assembly and installation procedures, and detail how structural connections are made. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 024B", "subject": "ACA", "number": "024B", "title": "Advanced Commercial Framing", "cid": [], "transfer": [], "description": "This course incorporates advanced commercial wall framing theory and construction techniques with structural hardware and shear panel installation. Students will interpret floor plans for job planning to layout and detail plates for complex wall configurations, rake walls and wall openings. Instruction will include measuring skills, use of mathematical principles, wall construction, plywood shear panel installation, and structural hardware attachment. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 024C", "subject": "ACA", "number": "024C", "title": "Panelized Roofing", "cid": [], "transfer": [], "description": "This course covers the structural components and building techniques associated with heavy timber construction and panelized roof systems. The advantages and types of manufactured wood used, and their load carrying strength, span, and spacing will be discussed. A distinction between standard post and beam, and heavy timber construction will be emphasized. Students will interpret floor plan, section views and drawing elevations for job planning to layout and construct a heavy timber post and beam supported panelized roof. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 024D", "subject": "ACA", "number": "024D", "title": "Transit Level/Laser", "cid": [], "transfer": [], "description": "This course covers the terminology, optical principles, and operating procedures for the transit and laser levels. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 024E", "subject": "ACA", "number": "024E", "title": "Total Station I", "prerequisite": "ACA 021A (Orientation); ACA 021B (Safety and Health Certifications)", "cid": [], "transfer": [], "description": "This course discusses the evolution of survey and layout instruments and the advantages of using a total station for building layout over traditional methods. Students will set up a total station and configure the software. Exercises will include working in teams to stake out points and record point data using the total station. Equipment maintenance and troubleshooting are also discussed. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 025", "subject": "ACA", "number": "025", "title": "Welding Fabrication", "prerequisite": "ACA 021A (Orientation); ACA 021B (Safety and Health Certifications)", "cid": [], "transfer": [], "description": "This course provides an introduction to the layout, cutting, and basic welding skills used in the fabrication process. The students will practice using oxy-acetylene equipment and accessories to setup, cut, shape, grind, weld, file, heat and bend metal parts. Training will include fundamental arc welding techniques to fabricate project components. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 025A", "subject": "ACA", "number": "025A", "title": "Foundations and Flatwork", "cid": [], "transfer": [], "description": "This course covers the design and function of several types of foundations and concrete flatwork. The methods, techniques and procedures for formwork layout, elevation, and construction will be presented and applied by students during practical assignments. Jobsite safety, print interpretation, material identification, and basic use of the builders’ level will be included in the training. Students will construct three selected formwork projects. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-025a", "subject": "ACA" } ] }, { "code": "ACA 025C", "subject": "ACA", "number": "025C", "title": "Advanced Stairs", "cid": [], "transfer": [], "description": "This course is designed to enhance the students' existing skills in the construction of basic stairs. Students will interpret floor plans and drawing elevations for job planning, and to layout and construct complex stair designs. Stair calculations will be adapted to determine the number of stairs, landing height, stair thread and riser dimensions. In addition to measuring skills, mathematical principles, stair and handrail fabrication and assembly, the installation techniques required for circular and u-shaped stair configurations will be covered. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 025D", "subject": "ACA", "number": "025D", "title": "Advanced Print Reading", "cid": [], "transfer": [], "description": "In this course, students will analyze multi-view drawings to determine construction type, locate benchmark and building elements; review codes, references, and perform calculations for construction planning. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 026A", "subject": "ACA", "number": "026A", "title": "Tilt-Up Panel Construction", "cid": [], "transfer": [], "description": "This class will cover layout techniques and building procedures for commercial structures using the tilt-up panel construction method. Various wall types, position, and sequence for raising panels will be discussed. Students will be able to explain the importance of layout methods in squaring panel formwork. A focus will be placed on identifying specific types of openings and on the location of finish floor and roof lines on prints. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 026B", "subject": "ACA", "number": "026B", "title": "Wall Forming", "cid": [], "transfer": [], "description": "This course covers the skills and procedures for forming reinforced concrete walls using single and double waler systems. Students will identify the characteristics and application of built-in-place, per-fabricated, and specialty forms. Practical exercises will prepare students for locating wall forming information on project plans, calculating layout dimensions, and for estimating material requirements. Basic wall panel forming and reinforcement methods, material preparation, and hardware installation are included in training. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 026C", "subject": "ACA", "number": "026C", "title": "Gang Forms/Columns", "cid": [], "transfer": [], "description": "This course presents the formwork types, applications and construction methods for gang and column forms using built and manufactured forming systems. Discussions will cover heavy timber gang forms and use of taper ties, bracing, and bulkhead tables. The course project will include gang and column formwork construction, assembly, and hardware using selected manufactured products. Related safety, mathematics and print reading will be covered in the training. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 026D", "subject": "ACA", "number": "026D", "title": "Abutments", "cid": [], "transfer": [], "description": "This course provides formwork construction skills for the abutment support structure used in most bridges and heavy highway projects. Students will identify abutment anatomy and will be instructed on footing layout, form detailing, and construction techniques used in the industry. Terminology, components, form materials, building code requirements and sequence of construction will be presented. Students will work collaboratively to complete an abutment formwork project including keyway, panel, head wall and wing wall construction. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 027C", "subject": "ACA", "number": "027C", "title": "Beam and Deck Forming", "cid": [], "transfer": [], "description": "This course will introduce the use of various woods, and patented forming systems for construction of concrete beams and decks. Students will identify formwork types and installation techniques including calculating materials and setting beam & deck forms. Metal beam forms and capitals will be highlighted. Additionally, layout and builders level skills will be used in this class. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 027D", "subject": "ACA", "number": "027D", "title": "Stairs and Ramp Forming", "cid": [], "transfer": [], "description": "Provides related and supplemental instruction for apprentice carpenters in the areas of the various techniques to form stairs and ramp structures; related safety, mathematics, and blueprint reading. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 028A", "subject": "ACA", "number": "028A", "title": "Bridge Construction", "cid": [], "transfer": [], "description": "This course provides students with an overview of bridge types and the skills required to perform standard bridge construction tasks. Students will be able to describe the purpose and function of exterior and interior girders, edge forms, bulkheads and hinge forms. Bridge formwork project will include panel construction, assembly, and hardware installation tasks. Related safety, math and print reading will be covered in the training. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-028a", "subject": "ACA" } ] }, { "code": "ACA 028C", "subject": "ACA", "number": "028C", "title": "Intermediate Commercial Framing", "cid": [], "transfer": [], "description": "This course enhances basic wall framing theory, and wall construction techniques are applied at increased skill levels. A review of basic wall framing and floor plans used for job planning, design recognition, and materials lists is included. Students will layout and detail wall plates for locating basic wall components and door openings. Instruction will include measuring skills, mathematical principles, wall assembly and installation procedures, and detail how structural connections are made. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 028E", "subject": "ACA", "number": "028E", "title": "Bridge Falsework", "prerequisite": "ACA 021A (Orientation); ACA 021B (Safety and Health Certifications)", "cid": [], "transfer": [], "description": "This course will focus on bridge falsework construction. The techniques for bent assemblies, base sub-assemblies, deck soffits and hardware installation will be presented. Falsework tasks will include rigging and alignment techniques. Related safety, math and print reading will be covered in the training. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 029A", "subject": "ACA", "number": "029A", "title": "Rigging", "cid": [], "transfer": [], "description": "This course presents both lifting theory and practical rigging methods and procedures. The design, characteristics and safety working load of lifting hardware will be discussed. Rigging attachment procedures, lifting equipment, limits of operation and communication practices will be covered. Upon successful completion, students will be issued United Brotherhood Of Carpenters (UBC) Rigging Qualification Cards. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 029BJ", "subject": "ACA", "number": "029BJ", "title": "Rigging Qualification Studies - Journeyworker", "cid": [], "transfer": [], "description": "This course provides an overview of lifting theory and the practical rigging methods and procedures required to maintain industry credentials. Rigging standards, procedures and communication practices will be covered. Upon successful completion, a student will be issued United Brotherhood of Carpenters (UBC) Rigging Qualification Cards.", "notes": [ "Limitations on Enrollment: Active Carpenter Union Member" ], "offered": [] }, { "code": "ACA 029C", "subject": "ACA", "number": "029C", "title": "Solar Installer Level 1", "prerequisite": "ACA 021A (Orientation); ACA 021B (Safety and Health Certifications)", "cid": [], "transfer": [], "description": "This course will provide workers with an industry overview and outlook for photovoltaic (renewable) energy production. Key terms and concepts of photovoltaic system operations will include solar cell technology, photovoltaic (PV) array configuration, series and parallel circuits, testing equipment, inspection, balance of system components, mounting methods, and applicable codes. Practical training will cover site analysis, system orientation based on site location, safety concerns, utilization of construction tools and skills for rooftop and ground mount system installations. Upon successful completion, students will receive a United Brotherhood of Carpenters (UBC) Solar Installer Level 1 Qualification Card.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 030A", "subject": "ACA", "number": "030A", "title": "Standard First Aid", "cid": [], "transfer": [], "description": "Enables carpenters to cope with accidents and emergency situations with the goal of protecting and saving lives. American Red Cross certificate available upon successful completion. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 033A", "subject": "ACA", "number": "033A", "title": "Cabinet Millwork and Assembly", "cid": [], "transfer": [], "description": "This course details cabinetry fabrication from design and function through the complete production process. An emphasis will be placed on print interpretation, job planning and proper construction sequence. Countertops and hardware styles and types will be discussed. Students will use the methods and procedures presented to build a typical base unit. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 033B", "subject": "ACA", "number": "033B", "title": "Cabinet Installation", "cid": [], "transfer": [], "description": "This comprehensive course covers cabinet installation from establishing the design layout to attaching countertops. To enhance student's skill level an emphasis will be placed on print interpretation, job planning and proper installation sequence. Students will use the methods and procedures presented to install typical upper and lower cabinetry units and countertops. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 033C", "subject": "ACA", "number": "033C", "title": "Show Case and Loose Store Fixtures", "cid": [], "transfer": [], "description": "This course includes basic cabinetmaking construction techniques for the installation of commercial store fixtures. Students' skill level will benefit from an emphasis placed on measuring, leveling, hand and power tool use, and safety. Students will interpret prints and material bills for the store fixture components included in the course project. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 033D", "subject": "ACA", "number": "033D", "title": "Molding and Trims", "cid": [], "transfer": [], "description": "This course covers how moldings and trims are utilized to finish exterior and interior construction design features. Product styles, characteristics, applications, and installation methods are included in the discussions. The tools techniques for cutting, coping and installing various molding and trim types are presented and practiced throughout the training. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 034A", "subject": "ACA", "number": "034A", "title": "Plastic Laminates", "cid": [], "transfer": [], "description": "This course covers installation of plastic laminates including function and design. Suitable materials, styles, and textures will be identified. Students will review prints to determine laminate type and calculate quantities. Installation methods and techniques for drop edge and back splash together with cleaning and repair will be emphasized. A countertop will be designed and installed to specifications. Correct use of tools and other equipment will be stressed. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 034B", "subject": "ACA", "number": "034B", "title": "Solid and Stone Surfaces", "cid": [], "transfer": [], "description": "This course covers both basic and advanced assembly and installation techniques for solid surface, natural stone and manufactured materials. Various products, designs, materials, accessories, and safety considerations will be included. Students will use the procedures presented to fabricate countertops with backsplash, and create a design inlay. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice", "Previous title: Apprenticeship Carpentry 034B, Solid Surface and Stone Countertops (2017)" ], "offered": [] }, { "code": "ACA 034C", "subject": "ACA", "number": "034C", "title": "Stair Trim", "cid": [], "transfer": [], "description": "This course covers how various trims are utilized to finish stair construction design features. Product styles, characteristics, applications, and installation methods are included in the discussions. The tools techniques for cutting and installing selected trim types are presented and practiced throughout the training. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 034D", "subject": "ACA", "number": "034D", "title": "Doors and Door Hardware", "cid": [], "transfer": [], "description": "This course covers the installation process for several types of security and exit door hardware. Discussion of electrical and card reader systems will be included. An emphasis will be placed on print interpretation, codes, door schedules, symbols, and hardware recognition. Students will use the methods and procedures presented to install selected door and hardware systems. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-034d", "subject": "ACA" } ] }, { "code": "ACA 035C", "subject": "ACA", "number": "035C", "title": "Exit and Electrical Security Devices", "cid": [], "transfer": [], "description": "This course will highlight the classification, types, models, codes, and uses for accident hazard exit (“panic”) devices. A range of security products and door hardware used in the industry such as crossbars, latches, flush bolts, and kick plates will be discussed. Proper selection, installation and adjustment techniques for selected devices will be covered. Students will complete installation and adjustment of two types of exit devices. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 040CJ", "subject": "ACA", "number": "040CJ", "title": "Scaffold Erector, Standard 40 Hour - Journeyworker", "cid": [], "transfer": [], "description": "This course will cover the basic techniques and procedures associated with frame, system, and tube and clamp scaffolds. Upon successful completion, a student will be issued a United Brotherhood Carpenters (UBC) Scaffold Qualification Card.", "notes": [ "Limitations on Enrollment: Active Carpenter Union Member" ], "offered": [] }, { "code": "ACA 040EJ", "subject": "ACA", "number": "040EJ", "title": "Scaffold Erector, Systems Scaffold - Journeyworker", "cid": [], "transfer": [], "description": "This course provides the required instruction in basic techniques and procedures associated with system scaffold components and focuses on terminology, component identification, construction practices, and safety considerations. Students will erect typical configurations to industry standards using system scaffold components. Upon successful completion, a student will be issued a United Brotherhood Carpenters (UBC) Scaffold Qualification Card. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Active Carpenter Union Member" ], "offered": [] }, { "code": "ACA 041A", "subject": "ACA", "number": "041A", "title": "Powered Industrial Truck Operator - Rough Terrain", "cid": [], "transfer": [], "description": "This course covers an overview for safe operation of rough terrain lift trucks for the construction industry, Code of Federal Regulations (CFR), and training requirements. Upon successful completion, students will be issued an United Brotherhood of Carpenters (UBC) Powered Industrial Truck Operator-Rough Terrain (RT) Qualification Card. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 041B", "subject": "ACA", "number": "041B", "title": "Powered Industrial Truck Operator - Industrial Terrain", "cid": [], "transfer": [], "description": "This course covers an overview for safe operation of industrial lift trucks for the construction industry, Code of Federal Regulations (CFR) regulations, and training requirements. Upon successful completion, a student will be issued an United Brotherhood of Carpenters (UBC) Powered Industrial Truck Operator-Industrial Truck (IT) Qualification Card. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 061A", "subject": "ACA", "number": "061A", "title": "Acoustical Ceilings", "cid": [], "transfer": [], "description": "This course provides an introduction to basic acoustical ceiling installation. Acoustical theory, engineering, and applicable building and seismic codes requirements will be covered. Students will install acoustical ceilings to industry standards using the proper techniques and procedures. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 061B", "subject": "ACA", "number": "061B", "title": "Advanced Acoustical Ceiling Layout", "cid": [], "transfer": [], "description": "This course identifies the advanced layout methods used to complete complex acoustical system installations. Students will use the skills presented to complete selected multifaceted acoustical ceiling layout projects as part of this course. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 061C", "subject": "ACA", "number": "061C", "title": "Advanced Acoustical Ceiling Installation", "cid": [], "transfer": [], "description": "This course identifies the advanced layout methods used to complete complex acoustical system installations. Students will use the tool and framing techniques presented to complete selected multifaceted acoustical ceiling layout projects. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-061c", "subject": "ACA" } ] }, { "code": "ACA 062", "subject": "ACA", "number": "062", "title": "Standard Acoustical Grids", "cid": [], "transfer": [], "description": "This course covers various grid patterns considered as standard for acoustical ceilings in the interior system construction industry. The methods and procedures used to form the patterns are the key focus of the course. Students will install several standard acoustical grid patterns to print specifications using the proper techniques and procedures. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 063", "subject": "ACA", "number": "063", "title": "Suspended Ceilings", "cid": [], "transfer": [], "description": "Provides instruction covering the installation of suspended ceilings in various configurations and will include both radius and square wall drywall suspension methods. Students will complete selected suspended ceiling installations using the techniques presented. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-063", "subject": "ACA" } ] }, { "code": "ACA 064", "subject": "ACA", "number": "064", "title": "Acoustical Soffits", "cid": [], "transfer": [], "description": "Provides instruction covering the construction of acoustical soffits in various configurations and will include square and slant faced, tapered, concealed, drywall suspension and sloped soffits methods. Students will complete selected acoustical soffit installations using the techniques presented. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 065", "subject": "ACA", "number": "065", "title": "Prefab/Sound Panels", "cid": [], "transfer": [], "description": "This course will focus on the technical knowledge and skills needed for the installation of prefabricated wall and ceiling panel systems. Students will use the proper techniques and manufacturers’ guidelines to install various types of prefabricated wall and ceiling panels. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 066", "subject": "ACA", "number": "066", "title": "Concealed/Glue-Up/Staple-Up Systems", "cid": [], "transfer": [], "description": "This course illustrates the design flexibility of concealed, semi-concealed ceilings and soffits using glue-up and staple-up systems. Students will employ the glue-up and staple-up techniques presented to install concealed grid ceiling system. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-066", "subject": "ACA" } ] }, { "code": "ACA 067", "subject": "ACA", "number": "067", "title": "Designer and Specialty Trims", "cid": [], "transfer": [], "description": "This course covers specialty skills needed to produce professionally finished edges for designer ceiling installations. Students will use the techniques presented to produce multiple ceiling edge contours using the compasso trim system. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 068", "subject": "ACA", "number": "068", "title": "Metal Pan and Security Systems", "cid": [], "transfer": [], "description": "This course will focus on design, function and installation of metal pan and security systems incorporated into construction of suspended ceilings. Students will demonstrate the ability to installation these components to direct wire and indirect channel suspension ceiling grid systems. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-068", "subject": "ACA" } ] }, { "code": "ACA 071A", "subject": "ACA", "number": "071A", "title": "Orientation", "cid": [], "transfer": [], "description": "This course provides an overview of the construction industry, safety overview, with focus on tool identification and use. Upon successful completion, students will receive OSHA 10 Hour and Powder Actuated Tool Certifications. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 071B", "subject": "ACA", "number": "071B", "title": "Safety and Health Certifications", "cid": [], "transfer": [], "description": "This course promotes hand/power tool and equipment skill development for various construction applications. Scaffold building and equipment operating procedures will also be covered. Financial and life skills will be presented to help them survive in the construction industry. Upon successful completion, students will be issued United Brotherhood of Carpenters (UBC) Scaffold Erector-Welded Frame Qualification Card. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-071b", "subject": "ACA" } ] }, { "code": "ACA 071C", "subject": "ACA", "number": "071C", "title": "Tool/Equipment Applications", "cid": [], "transfer": [], "description": "This course covers the safe and appropriate use of fall protection, and emergency response procedures. Tool applications presented in this training will provide opportunities for tool skill mastery and equipment operation. Upon successful completion, students will be issued an American Red Cross First Aid/CPR Certification Card, and United Brotherhood of Carpenters (UBC) Fall Protection Qualification Card. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-071c", "subject": "ACA" } ] }, { "code": "ACA 072A", "subject": "ACA", "number": "072A", "title": "Basic Metal Framing", "cid": [], "transfer": [], "description": "Provides students with an overview of the use of metal framing materials in construction of building interiors. A comparison of metal framing and typical wood framing techniques will be presented. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 072B", "subject": "ACA", "number": "072B", "title": "Basic Lathing", "cid": [], "transfer": [], "description": "This course presents the basic framing and lathing methods used in the industry for exterior/interior installations. The course will focus on exterior waterproofing, lath, and trim installation procedures. Students will use the skills presented to complete an exterior lathing project as part of this course. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 072C", "subject": "ACA", "number": "072C", "title": "Advanced Lathing", "prerequisite": "ACA 021A (Orientation); ACA 021B (Safety and Health)", "cid": [], "transfer": [], "description": "This course presents advanced methods and application techniques for lath and trim products used on exterior-interior metal framing. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 073A", "subject": "ACA", "number": "073A", "title": "Framing Ceilings and Soffits", "cid": [], "transfer": [], "description": "This course identifies the materials used and their application for various types of fire rated walls, ceilings and soffits. It presents methods and procedures used for layout and template development. Drywall and trim applications are discussed. The types of tools used and their associated safety, applied math and print reading fundamentals are reviewed. Students will use the skills presented to complete a ceiling and soffit project as part of this course. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-073a", "subject": "ACA" } ] }, { "code": "ACA 073B", "subject": "ACA", "number": "073B", "title": "Framing Suspended Ceilings", "cid": [], "transfer": [], "description": "Provides instruction covering the installation of circular ceilings with drops, and drywall suspension in both square and circular grids. Students will complete selected suspended ceiling installations using the techniques presented. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-073b", "subject": "ACA" } ] }, { "code": "ACA 073C", "subject": "ACA", "number": "073C", "title": "Framing Curves and Arches", "cid": [], "transfer": [], "description": "This course provides instruction in framing methods for curves and arches and their related structural limitations. It identifies the various wall and ceiling types and the layout principles, and materials used for each Lath applications and trim are also discussed. Students will use the skills presented to complete a framing project that includes curves and arches. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-073c", "subject": "ACA" } ] }, { "code": "ACA 074A", "subject": "ACA", "number": "074A", "title": "Print Reading", "cid": [], "transfer": [], "description": "This course introduces basic visualization skills needed for reading and interpreting construction prints. Views, elevations and the role of specifications as they relate to insulation details on prints will be discussed. An awareness of sustainable and green building practices will be covered during the course. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-074a", "subject": "ACA" } ] }, { "code": "ACA 074B", "subject": "ACA", "number": "074B", "title": "Advanced Print Reading", "cid": [], "transfer": [], "description": "In this course, students will analyze multi-view drawings to determine acoustical ceiling construction types, locate benchmark and building/wall elements; review codes, references, and perform calculations for construction/ceiling grid planning. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 074C", "subject": "ACA", "number": "074C", "title": "Air, Moisture, and Thermal Barriers", "prerequisite": "ACA 071A (Orientation); ACA 071B (Safety and Health Certifications)", "cid": [], "transfer": [], "description": "This course will demonstrate that correctly installed air, moisture and thermal barrier systems increase building envelope energy efficiency. Building sealing products and installation techniques will be the main focus of hands-on exercises. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 075A", "subject": "ACA", "number": "075A", "title": "Light Gage Welding AWS - A", "units": "1.5", "hours": "45 contact hours total", "cid": [], "transfer": [], "description": "This course covers light gage welding methods and techniques. American Welding Society (AWS) welding processes, symbols, materials and safety procedures will be presented. Students will practice setting up equipment and identifying the proper electrode position and speed. Instruction will include an explanation of typical metal frame welding practices. An emphasis on hands-on experience using 6013 electrodes will reinforce proper use of the welding procedures. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-075a", "subject": "ACA" } ] }, { "code": "ACA 075B", "subject": "ACA", "number": "075B", "title": "Light Gage Welding LAC", "cid": [], "transfer": [], "description": "This course covers light gage welding methods and techniques. American Welding Society (AWS) welding processes, symbols, materials and safety procedures will be presented. An emphasis on hands-on experience using 6010 electrodes will reinforce proper use of required welding procedures, and ability to perform welding tasks used to complete the Los Angeles City (LAC) certification process. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 075C", "subject": "ACA", "number": "075C", "title": "Light Gage Welding AWS - B", "cid": [], "transfer": [], "description": "This course covers light gage welding methods and techniques. American Welding Society (AWS) welding processes, symbols, materials and safety procedures will be presented. An emphasis on hands-on experience using 6013 electrodes will reinforce proper use of required welding procedures, and ability to perform welding tasks used to complete AWS certification process. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-075c", "subject": "ACA" } ] }, { "code": "ACA 076A", "subject": "ACA", "number": "076A", "title": "Basic Hand Finishing", "cid": [], "transfer": [], "description": "This course is designed to develop basic hand finishing skills using the correct tools and materials. The training will include terminology and description of finishing levels as well as hand tool manipulation techniques, material identification and selection criteria. Manufacturer’s guidelines will highlight the environmental conditions for proper mixture preparation and use. Key discussions will draw attention to typical finish issues, causes, and solutions frequently employed. Tool techniques and application sequence and will be explained and demonstrated. The importance of mixture consistency, proper coating sequence will be stressed during level four hand finishing exercises. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 076B", "subject": "ACA", "number": "076B", "title": "Automatic Finishing Tools", "cid": [], "transfer": [], "description": "This course will advance the methods, applications and sequences of the bazooka, skim boxes, nail spotters and angle boxes. Students will be required to demonstrate the ability to tape in different situations and the ability to coat all field and butt joints. The levels of finishing and the various finish trims will be discussed. The operation of automatic taping and finishing machine tools including those newly introduced to the industry will be covered. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 077A", "subject": "ACA", "number": "077A", "title": "Drywall Installation/Finish Trims", "cid": [], "transfer": [], "description": "This course will introduce drywall handling methods, applications and recommended levels of drywall finish to achieve the desired aesthetics. An emphasis will be placed on trim attachment and finishing techniques. Various types of finish trim will be identified. Students must demonstrate proficiency in the proper use of automatic taping tools. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-077a", "subject": "ACA" } ] }, { "code": "ACA 077B", "subject": "ACA", "number": "077B", "title": "Advanced Hand Finishing", "cid": [], "transfer": [], "description": "This course will focus on advanced methods and applications using hand tool techniques. The proper sequence of operation, phases and materials to be used in order to produce a higher level finished product to industry standards. Curved and radius wall characteristics for finish levels will be discussed. The course will cover wall frame components, materials used, surface preparation, and application methods. Students will complete a project to a Level Five standard. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 077C", "subject": "ACA", "number": "077C", "title": "Advanced Automatic Finishing Tools", "cid": [], "transfer": [], "description": "This course will advance the methods, applications and sequences of the bazooka, skim boxes, nail spotters and angle boxes. Students will be required to demonstrate the ability to tape in different situations and the ability to coat all field and butt joints. The levels of finishing and the various finish trims will be discussed. The operation of automatic taping and finishing machine tools including those newly introduced to the industry will be covered. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 078B", "subject": "ACA", "number": "078B", "title": "Advanced Metal Framing", "cid": [], "transfer": [], "description": "This course will begin with a quick review of basic metal framing followed by detailed procedures for framing curved, serpentine, and elliptical non load bearing partitions. Using standard light gage components and other materials, students will learn advanced techniques to expedite work processes. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 078C", "subject": "ACA", "number": "078C", "title": "Wet Wall Finishes", "cid": [], "transfer": [], "description": "This course presents industry methods, mediums, and typical application of wet wall finishes. The training will include terminology and description of industry standard finishing levels; application tool types and techniques, material identification and selection. Manufacturer’s guidelines will highlight the environmental conditions for proper mixture preparation and use. Key discussions will draw attention to typical finish issues, causes for defects, and solutions frequently employed, and emphasize the selection and use of low volatile organic compounds (VOC) products. The importance of mixture consistency, proper coating sequence will be stressed during wet wall finishing exercises. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-078c", "subject": "ACA" } ] }, { "code": "ACA 078D", "subject": "ACA", "number": "078D", "title": "Ceiling and Soffit Finishing", "cid": [], "transfer": [], "description": "This course is designed to develop an advanced level of finishing skill for applications with architecturally detailed ceilings and soffits. Students will be required to determine type and quantity of materials for various designs and differentiate between levels of finish. Guided practice with a combination of hand and automatic tool techniques will promote manipulative ability required for a successful result. A variety of finish trims will be integrated into each method of finish. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 079A", "subject": "ACA", "number": "079A", "title": "Drywall and Acoustical Ceilings", "cid": [], "transfer": [], "description": "This course identifies the materials and methods used for acoustical ceilings combined with drywall installation. Seismic codes, materials, and requirements are also reviewed. Green building rating systems will be applied to selected acoustical and drywall materials. Installation for various grid systems will be discussed. Students will use the skills learned to complete a drywall-acoustical ceiling project. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-079a", "subject": "ACA" } ] }, { "code": "ACA 079C", "subject": "ACA", "number": "079C", "title": "Drywall Applications", "cid": [], "transfer": [], "description": "This course provides needed commercial and residential skills to properly handle and install drywall used in specialized applications. Productivity techniques will be discussed and practiced under jobsite conditions. Wall framing and drywall finishing methods will be incorporated into the hands-on activity. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice", "Previous title: Apprenticeship Carpentry 079C, Drywall Applications (2016)" ], "offered": [] }, { "code": "ACA 079D", "subject": "ACA", "number": "079D", "title": "Drywall Applications", "cid": [], "transfer": [], "description": "This course provides needed commercial and residential skills to properly handle and install drywall used in specialized applications. Productivity techniques will be discussed and practiced under jobsite conditions. Wall framing and drywall finishing methods will be incorporated into the hands-on activity. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 082B", "subject": "ACA", "number": "082B", "title": "S/B Firestop/Fireproofing Procedures", "cid": [], "transfer": [], "description": "This course covers various firestop/fireproofing systems and methods used as fire protection and fire control. Key discussions will highlight applicable fire codes and industry standards for testing firestop/fireproof methods. Manufacturer’s guidelines will identify application tool anatomy, instruction for job preparation, loading instructions, operating procedures, maintenance and care of equipment. Basic descriptions of penetration types and the materials used, including non-combustibles and B-Expands, will be covered. Students will apply and test firestop/fireproofing material in a controlled environment. Open Entry/Open Exit. Former Title: Apprenticeship Carpentry 082B, Firestopping Procedures (2020)", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-082b", "subject": "ACA" } ] }, { "code": "ACA 082C", "subject": "ACA", "number": "082C", "title": "Decorative Trims and Textures", "cid": [], "transfer": [], "description": "This course provides advanced hand and automatic tool finishing techniques used to apply decorative trims and special surface textures. Training includes product information for metal, paper, plastics and art beads. Special attention will be given to coating and sanding sequence of field and butt joints for selected surface textures. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 083", "subject": "ACA", "number": "083", "title": "Door and Door Frames", "cid": [], "transfer": [], "description": "An introduction to the doors and door frames used in the interior systems industry. The course discussions will incorporate applicable regulations governing door openings and door selection. Hardware, controlling and locking devices, and door layout and installation techniques will be included. Basic math and print reading will be covered as will tool-related safety concerns. Students will use the skills presented to complete a selected door and door frame installation project as part of this course. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 083C", "subject": "ACA", "number": "083C", "title": "Door/Door Frame", "prerequisite": "ACA 021A (Orientation); ACA 021B (Safety and Health Certifications)", "cid": [], "transfer": [], "description": "This course covers the installation process from constructing rough openings to hanging and adjusting doors. An emphasis will be placed on print interpretation, door schedules, symbols and hardware recognition. Students will use the methods and procedures presented to install selected frames and doors for wood framing applications. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [ { "term": "summer-2026", "name": "Summer 2026", "sections": 1, "open": 0, "url": "/c/santiago-canyon-college/schedule/summer-2026/aca/#aca-083c", "subject": "ACA" } ] }, { "code": "ACA 086A", "subject": "ACA", "number": "086A", "title": "Exterior Insulation Finish Systems (EIFS)", "cid": [], "transfer": [], "description": "This course is an introduction to exterior insulation finish systems including terminology, definitions, specifications, and properties. It will deal with reinforcing mesh installation and the application of insulation board. Application methods and techniques for primers and finishes will be presented. Students will use the skills presented to complete an EIFS installation project as part of this course. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 089", "subject": "ACA", "number": "089", "title": "Freeform Lathing", "cid": [], "transfer": [], "description": "This course provides a comprehensive study of the theory and techniques used for the development of freeform lathing projects. This course will enable students to interpret gridline drawings; layout and build lath cage work and apply the appropriate lath(s) to achieve the desired or designed form or structure. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 090", "subject": "ACA", "number": "090", "title": "Residential Steel Stud Framing", "cid": [], "transfer": [], "description": "Provides the related and supplemental instruction required for interior systems apprentices in the new technology of cold-formed light gage steel framing for the residential market. Methods of constructing a structural floor, wall and truss system. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] }, { "code": "ACA 094J", "subject": "ACA", "number": "094J", "title": "Confined Space - Journeyworker", "cid": [], "transfer": [], "description": "This course covers both CAL-OSHA and Federal Occupational Safety and Health Administration (OSHA) regulation for safe access, entry and monitoring for confined space work. Upon successful completion, a student will be issued United Brotherhood of Carpenters (UBC) Confined Space Qualification Card.", "notes": [ "Limitations on Enrollment: Active Carpenter Union Member" ], "offered": [] }, { "code": "ACA 095", "subject": "ACA", "number": "095", "title": "Water Treatment Facilities", "prerequisite": "ACA 021A (Orientation); ACA 021B (Safety and Health)", "cid": [], "transfer": [], "description": "This course provides instruction in the detailing, layout and construction of concrete formwork and waterstop used in water treatment facilities. Open Entry/Open Exit.", "notes": [ "Limitations on Enrollment: Must be a state-indentured apprentice" ], "offered": [] } ] }