{ "college": "allan-hancock-college", "edition": "2026-2027", "code": "MT", "name": "Machine Technology", "sourceUrl": "https://hancockcollege.curriqunet.com/catalog/iq/28544/28871/31188", "courses": [ { "code": "MT 109", "subject": "MT", "number": "109", "title": "Survey of Machining and Manufacturing", "units": "4", "cid": [], "transfer": [ "CSU" ], "description": "An introduction to machining and manufacturing technology where students will learn basic tool geometry, blueprint reading, shop math, precision measuring tools, co-ordinate systems and how to safely operate a variety of industrial equipment.", "notes": [ "Course Offered: Spring, Summer, Fall", "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [ { "term": "fall-2026", "name": "Fall 2026", "sections": 3, "open": 3, "url": "/c/allan-hancock-college/schedule/fall-2026/mt/#mt-109", "subject": "MT" }, { "term": "spring-2027", "name": "Spring 2027", "sections": 2, "open": 2, "url": "/c/allan-hancock-college/schedule/spring-2027/mt/#mt-109", "subject": "MT" } ] }, { "code": "MT 110", "subject": "MT", "number": "110", "title": "CNC G Code", "units": "4", "advisory": "MT 109", "cid": [], "transfer": [ "CSU" ], "description": "This course is designed for students with machine shop experience seeking to learn set-up, operation and programming of computer numerical controlled (CNC) machines. Included is an introduction to Computer Aided Design and Manufacturing (CAD/CAM).", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [ { "term": "spring-2027", "name": "Spring 2027", "sections": 1, "open": 1, "url": "/c/allan-hancock-college/schedule/spring-2027/mt/#mt-110", "subject": "MT" } ] }, { "code": "MT 111", "subject": "MT", "number": "111", "title": "CNC CAD/CAM", "units": "4", "advisory": "MT 109", "cid": [], "transfer": [ "CSU" ], "description": "This course is designed for students with computer numerical controlled (CNC) machining and/or computer-aided design and computer-aided manufacturing (CAD/CAM) experience who wish to learn advanced set-up, operation and programming using CNC machines and CAD/CAM software.", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [ { "term": "fall-2026", "name": "Fall 2026", "sections": 1, "open": 1, "url": "/c/allan-hancock-college/schedule/fall-2026/mt/#mt-111", "subject": "MT" } ] }, { "code": "MT 112", "subject": "MT", "number": "112", "title": "CNC Multi-Axis", "units": "4", "advisory": "MT 111", "cid": [], "transfer": [ "CSU" ], "description": "An advanced course in computer numerical controlled (CNC) machining where students will learn to design complex parts using CAD/CAM software and produce them on 4 and 5 axis CNC milling machines and lathes with “live tooling.”", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [ { "term": "spring-2027", "name": "Spring 2027", "sections": 1, "open": 1, "url": "/c/allan-hancock-college/schedule/spring-2027/mt/#mt-112", "subject": "MT" } ] }, { "code": "MT 113", "subject": "MT", "number": "113", "title": "SolidWorks 1", "units": "3", "cid": [], "transfer": [ "CSU" ], "description": "An introduction to three-dimensional computer aided design(CAD/CAM) where students will learn to design complex objects using SolidWorks. At the end of the course, students will be prepared for the Certified SolidWorks Associate (CSWA) assessment. It is recommended that students be capable of using a personal computer and managing computer files.", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [ { "term": "spring-2027", "name": "Spring 2027", "sections": 1, "open": 1, "url": "/c/allan-hancock-college/schedule/spring-2027/mt/#mt-113", "subject": "MT" } ] }, { "code": "MT 114", "subject": "MT", "number": "114", "title": "SolidWorks 2", "units": "3", "advisory": "MT 113", "cid": [ "N/A" ], "transfer": [ "CSU" ], "description": "An advanced course in three dimensional computer-aided-design (CAD) where students will learn to design complex parts and assemblies using SolidWorks. Students will learn to use SolidWorks to design Weldments, Sheet Metal components and Molds. This course will prepare students for the Certified SolidWorks Professional (CSWA) exam.", "notes": [ "Course Offered: Spring", "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] }, { "code": "MT 115", "subject": "MT", "number": "115", "title": "Lean Manufacturing", "units": "3", "cid": [ "N/A" ], "transfer": [ "CSU" ], "description": "An introduction to the theory and practice of continuous improvement where students will learn to identify and eliminate waste, improve quality and increase efficiency in every area of manufacturing operations. Students will participate in an actual Kaizen (or continuous improvement) event to make a change for the better in a real world setting.", "notes": [ "Course Offered: Fall", "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] }, { "code": "MT 116", "subject": "MT", "number": "116", "title": "Mastercam 1 (CAD/CAM)", "units": "3", "cid": [], "transfer": [ "CSU" ], "description": "An introduction to Mastercam, a leading software for computer-aided design/computer-aided manufacturing (CAD/CAM). Students will learn to create lines and arcs, simple surfaces and solids. Students will create tool paths and machine code for CNC lathes, mills and routers.", "notes": [ "Course Offered: Spring, Fall", "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] }, { "code": "MT 117", "subject": "MT", "number": "117", "title": "Print Reading and Interpretation", "units": "3", "cid": [], "transfer": [ "CSU" ], "description": "An introductory class where students will learn to read engineering drawings, evaluate print specifications, recognize orthographic views and visualize the actual objects or projects shown in the illustration. This course is not open to students who are enrolled in or have received credit for AB 330, AT 330, ET 330, MT 330, or AB/AT/ET 117.", "notes": [ "Course Offered: Spring, Fall", "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [ { "term": "spring-2027", "name": "Spring 2027", "sections": 1, "open": 1, "url": "/c/allan-hancock-college/schedule/spring-2027/mt/#mt-117", "subject": "MT" } ] }, { "code": "MT 118", "subject": "MT", "number": "118", "title": "Understanding and Measuring GD&T", "units": "3", "advisory": "MT 117", "cid": [ "N/A" ], "transfer": [ "CSU" ], "description": "An advanced class where students will learn to interpret complex manufacturing specifications, symbols and standards, including those referred to as Geometric Dimensioning and Tolerancing (GD&T). Students will evaluate components using a coordinate measuring machine and learn to generate accurate inspection reports. This course is not open to students who have received credit for MT 331.", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [ { "term": "fall-2026", "name": "Fall 2026", "sections": 1, "open": 1, "url": "/c/allan-hancock-college/schedule/fall-2026/mt/#mt-118", "subject": "MT" } ] }, { "code": "MT 189", "subject": "MT", "number": "189", "title": "Independent Projects", "units": "1-3", "cid": [], "transfer": [ "CSU" ], "description": "Acceptable for credit: CSU, UC-Determined after admission Courses for students capable of independent work who demonstrate the need or desire for additional study beyond the regular curriculum. Enrollment allows students to pursue activities such as directed field experience, research, or development of skills and competencies under faculty advisement and supervision. Independent projects may be earned in most disciplines. Students wishing to enroll in Independent Projects should contact the appropriate instructor identified in the class schedule. If the project proposed is acceptable to that instructor, a contract will be developed. All contracts for these classes must be completed and submitted to the Records Office no later than the end of the second week of the semester. Students may enroll for any combination (unit value) of Independent Projects 189 and/or 389 for a total of four semesters in a specific discipline. Units are awarded depending upon satisfactory performance and the amount of time committed by the student to the course. Allowable units vary according to discipline, and are based on the following formula: 1 unit - 48 hours per semester 2 units - 96 hours per semester 3 units - 144 hours per semester", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] }, { "code": "MT 300", "subject": "MT", "number": "300", "title": "Shop Math and Measurement", "units": "3", "cid": [], "transfer": [], "description": "An introduction to the mathematics used in the Industrial Technology programs. Students will learn to solve problems using fractions, decimals, percentage, ratios and basic geometric shapes. Students will learn about the Cartesian coordinate system and how to use a variety of basic and precision measuring tools from rulers and tape measures to calipers and micrometers. This course is not open to students who are enrolled in, or have received credit for MT 381, AB 381, AT 381, ET 381, WLDT 381, or AT/AB/ET/WLDT 300.", "notes": [ "Course Offered: Spring, Fall", "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [ { "term": "fall-2026", "name": "Fall 2026", "sections": 2, "open": 2, "url": "/c/allan-hancock-college/schedule/fall-2026/mt/#mt-300", "subject": "MT" }, { "term": "spring-2027", "name": "Spring 2027", "sections": 2, "open": 2, "url": "/c/allan-hancock-college/schedule/spring-2027/mt/#mt-300", "subject": "MT" } ] }, { "code": "MT 301", "subject": "MT", "number": "301", "title": "Introduction to Safety", "units": "2", "cid": [], "transfer": [], "description": "An introduction to manufacturing safety principles and practices. Students will learn about Material Safety Data Sheets (MSDS), work in confined space, lock out/tag out, zero energy state, hazardous materials, storage of flammable materials, storage of fuel gas and high pressure gas cylinders, portable powered tool safety, hand tool safety, record keeping, training, employer enforcement of safety regulations, and employee right to know. This course will prepare students for the optional Certified Production Technician (CPT) assessment through the Manufacturing Skill Standards Council (MSSC).", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] }, { "code": "MT 302", "subject": "MT", "number": "302", "title": "Quality & Process Improvement", "units": "2", "cid": [], "transfer": [], "description": "An introduction to quality practices in manufacturing. Students will learn to read and interpret blueprints, understand Geometric Dimensioning and Tolerancing(GD&T, use essential measuring tools, perform root cause failure analysis, adopt methods of process improvement and employ statistical tools. This course will prepare students for the optional Certified Production Technician (CPT) assessment through the Manufacturing Skill Standards Council (MSSC).", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] }, { "code": "MT 303", "subject": "MT", "number": "303", "title": "Manufacturing Processes and Production", "units": "2", "cid": [], "transfer": [], "description": "An introduction to manufacturing procedures, practices and principles. Students will learn about mechanical principles, machining operations and tooling, production materials documentation, manufacturing planning, production control, inventory management and product distribution. This course will prepare students for the optional Certified Production Technician (CPT) assessment through the Manufacturing Skill Standards Council (MSSC).", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] }, { "code": "MT 304", "subject": "MT", "number": "304", "title": "Maintenance Awareness", "units": "2", "cid": [], "transfer": [], "description": "An introduction to manufacturing maintenance awareness. Students will learn about basic electrical circuits, electrical, pneumatic and hydraulic power systems, lubrication concepts, bearings, and couplings, belt and chain drives and the concepts of machine control and automation. This course will prepare students for the optional Certified Production Technician (CPT) assessment through the Manufacturing Skill Standards Council (MSSC).", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] }, { "code": "MT 306", "subject": "MT", "number": "306", "title": "Advanced Machining", "units": "1.5", "advisory": "MT 109", "cid": [], "transfer": [], "description": "This course will provide advanced training, continuing education and professional development for persons using industrial machine tools. Students will learn safe work habits, advanced set-up strategies and machining fundamentals such as the selection of optimum cutting speeds and feeds.", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] }, { "code": "MT 315", "subject": "MT", "number": "315", "title": "Advanced Machining", "units": "4", "prerequisite": "MT 110", "cid": [], "transfer": [], "description": "An individualized course of instruction covering those skills required for employment in a manufacturing machining facility, general machining facility, or a maintenance machining facility. The student will select 4, 8, 12, or 16 units from the appropriate skill cluster table (available in the Counseling Center).", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] }, { "code": "MT 370", "subject": "MT", "number": "370", "title": "SkillsUSA", "units": "3", "cid": [], "transfer": [], "description": "SkillsUSA is a partnership of students, teachers and industry working together to ensure America has a skilled workforce. This SkillsUSA course prepares students for employment and inter-collegiate competition in Career Technical Education. Students will learn to plan projects, work in teams, solicit community support and develop a range of skills valued by employers. Students registered for this class may not register for AB 370, ARCH 370, AT 370, EL 370, ET 370, or WLDT 370 during the same semester. Participation in the SkillsUSA competition is required. This course may be repeated up to three times for credit with different competitions.", "notes": [ "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] }, { "code": "MT 389", "subject": "MT", "number": "389", "title": "Independent Projects", "units": "1-3", "cid": [], "transfer": [], "description": "MT 389 Independent Projects is for students capable of independent work who demonstrate the need or desire for additional study beyond the regular curriculum. Enrollment allows students to pursue activities such as directed field experience, search or development of skills and competencies under faculty advisement and supervision. Students wishing to enroll in MT 389 Independent Projects should contact the appropriate instructor identified in the class schedule. If the project proposed is acceptable to that instructor, a contract will be issued no later than the end of the second week of the semester. Units are awarded depending upon satisfying performance and the amount of time committed by the students to the course. Allowable units vary according to discipline, and are based on the following formula: 1 unit - 48 hours per semester 2 units - 96 hours per semester 3 units - 144 hours per semester", "notes": [ "Course Offered: As Needed", "Grading Method: Letter Grade or Pass/No Pass" ], "offered": [] } ] }